AW Diversity Antenna Distribution Module [DADM228-P] - IN STOCK

DADM228-P is a custom design offers Diversity Antenna and DC power distribution solution for portable sound bags or sound carts

Diversity Antenna Distribution Module DADM228-P is a custom design, which

offers the solution to antenna and power distribution requirements for portable

sound bag and sound trolley applications. Designed for where the weight and

size matters without sacrificing on performance.

The DADM228-P is a 2xIN and 2x8 OUT active antenna distribution system with

in-built band-pass filtering; the DADM228 eliminates multiple receiver antennas

and provides a tidy sound bag solution with improved RF performance.

The DADM228-P has a very high input signal handling capacity with very low

noise figure and offers an outstanding inter-modulation performance when

compared to other low power devices available.

The system box offers, +6dB to -10dB gain user adjustable in 1dB steps to suit

individual applications. The user adjustable gain offers flexibility optimizing

system RF gain budget to suit, Digital, Hybrid and Analogue receivers.

There are two industry standard BNC input connectors for antenna inputs which

enables use of standard low loss RF extension cables, and there 2x8 mini-RF

SMA connectors feeding the diversity receivers.

In applications when remote antenna powering is needed, the DADM offers

switchable MHA powering with RED LEDs indicating power ON/OFF status, the

MHA powering can be turned ON/OFF through the OLED display menu.

The antenna inputs compromise a very low loss very selective band-pass filter

designs to reject unwanted frequencies below and above the tuning bandwidth.

The DADM is externally powered between 10-18Vdc, the dc input connector is

an industry standard 4-pin Hirose, a green LED indicates power-on status of the

system box and the OLED display continuously displays dc input voltage.

The DC distribution is with 6xHirose dc output connectors for powering auxiliary

equipment in any sound bag. Each dc output port can be individually turned

ON/OFF through the OLED menu.

Audio Wireless Diversity Antenna and dc power distribution systems are now

first choice among freelance sound engineers, hiring companies as well as

major broadcasters for all wireless microphone applications.

KEY FEATURES:

• One pair of antenna feeds up to eight diversity receivers
• Built-in band-pass filtering and signal splitters
• User adjustable gain
• Remote antenna powering
• 6 x Hirose dc outputs
• Industry standard connectors
• Intuitive OLED display menu and LED indicators
• Single power source solution
• Master ON-OFF switch
• Continuous system volts monitoring
• Soft ON/OFF switch for each individual Remote Antenna powering
• Soft ON/OFF switch for each Hirose dc output
• CNC machined aluminum custom design, lightweight and rugged - fits neatly in any sound bag and sound cart

RF Distribution Section
Frequency Range	470 to 1164MHz(in bands)
Input Impedance	50 Ω
Output Impedance	50 Ω
Gain (each output)	+6 dB to -10dB, user adjustable
Current Consumption	135mA

UHF Bandpass Type
Available Bandwidths	470-700MHz, 470-608MHz, 470-663MHz, 470-960MHz, 470-990MHz, 510-622MHz, 960-1164MHz (UK DME BAND), 470-1164MHz (Covers UK DME BAND)
OIP3	> +41dBm
Port to port isolation	> 20dB (min.)
Noise figure	< 3 dB

Connections
RF Inputs	2 x 50 Ω Standard BNC Sockets
RF/DC outputs to receivers	2 x 4 x 50 Ω mini UHF SMA sockets
Main ON/OFF Switch	Master switch
DC Power OUT	6 x 4-pin Hirose sockets individually fused and protected against reverse polarity, standard pin-outs, Pin1(-ve) and Pin4(+ve)

Powering
External Power	10-18V dc
Remote Antenna Powering	Switchable dc T-bias powering, 12Vdc @ 200mA max, regulated for active antenna powering, short circuit protected
Hirose dc output	Unregulated incoming volts, switched, individually fused and protected against reverse polarity

Outer Case
Dimensions	192x42x64mm (W x H x D)
Weight	465g
Related Accessories	16 x SMA to SMA link cables (custom lengths) 2 x BNC to BNC Antenna extension cables (custom lengths) 2 x monopole BNC Antennae 1 x 4-pin Hirose to 4-pin Hirose dc power cable (custom lengths) 1 x LPDA-DIV 2 x LPDA-P 2 x LPDA-A-WB 2 x LPDA-A-DT V2